StarTech Network R300WN22MOD5 IP67 Certified 2T2R 300Mbps 5GHz Wireless-N Access Point Retail
- SKU: 159634
- Vendor: StarTech
- UPC: 065030857765
This outdoor access point features an IP67 certified, die-cast metal enclosure with heavy-duty cable grommets so it can withstand the outdoor elements and offers pole and wall-mounting options. Plus, the PoE-powered AP includes a passive Power-over-Ethernet injector, enabling you to install it in locations where a typical power outlet is unavailable. PoE pass-through via the secondary LAN port lets you connect data and power to a PoE-capable device near the access point.
By isolating your WiFi network to the 5GHz frequency, dual-band smartphones, tablets or laptops can operate with less interference from other devices than on the more common 2.4GHz band. For optimal wireless coverage, the AP broadcasts a signal through a high-powered 800mW internal 10dBi 2T2R antenna.
The device offers support for several different operating modes (AP, WDS and WISP), which help you to create a wireless network from a wired connection, bridge multiple APs together or extend the range of an existing wireless network. The AP supports Wireless-N data rates up to 300Mbps with security through WEP, WPA, or WPA2 authentication, all configurable through an easy-to-use web-based utility.
Hardware
Interface:Wireless Ethernet
Antenna Configuration:2x2:2 (TxR:S)
Industry Standards:IEEE 802.3, IEEE 802.3u IEEE 802.11a/n
IP67 certified
Chipset ID:Atheros - AR9342
Connector(s)
Connector Type(s):1 - Wireless N (IEEE 802.11n)
Internal Ports:2 - RJ-45 Female
Performance
Maximum Data Transfer Rate:300 Mbps
Max Distance:3.7 km (2.3 mi)
Bandwidth:20/40 MHz
Full Duplex Support:Yes
Frequency Range:5.200 5.805 GHz
Modulation:OFDM with BPSK, QPSK, 16-QAM and 64-QAM
Security Features:
TKIP/AES
WEP Data Encryption
WPA Data Encryption
Supported Protocols:CSMA/CA
System and Cable Requirements
Available indoor AC electrical outlet
Cat 5 (or better) network cabling from PoE
Injector to Wireless AP and PoE Injector to LAN Switch/router (no more than 100m total)
Color
Gray
Enclosure Type
Aluminum and Plastic
Indicators
LED Indicators:
3 - Wireless Signal Strength
1 - Power
2 - LAN Link / Activity
Power
Power Source:AC Adapter Included
Input Voltage:100 240 AC
Input Current:1 A
Output Voltage:48 DC
Output Current:0.5 A
Center Tip Polarity:Positive
Plug Type:N
Power Consumption:13.5 Watts max
Included in Package
1 - Outdoor Wireless Access Point
1 - PoE Injector
1 - Pole Mounting Kit
1 - Power Adapter
1 - Quick Start Guide
Item Dimension (L"xW"xH"):
14.17 x 8.46 x 3.54
Weight:
2.56 lb
Warranty Information:
2 Year Warranty