StarTech Removable Device S251BRU31C3 2.5" SATA SSD/HDD USB3.1 10Gbps External Hard Drive Enclosure Retail
- SKU: 211458
- Vendor: StarTech
- UPC: 065030872430
Maximize the performance of your 2.5” SATA drives
The drive enclosure delivers USB 3.1 Gen 2 performance with data transfer speeds of up to 10Gbps, letting you leverage the high performance of the latest drives while alleviating bottlenecks in your data transfers. With support for SATA I, II, and III, and high-capacity drives, this USB-C enclosure is compatible with virtually any 2.5” SATA SSD or HDD.
IP65 rated for water and dust resistance
Be prepared for the unexpected when you’re out in the field, in outdoor or industrial environments. The rugged hard drive enclosure provides superior water and dust resistance with an IP65 rating, to keep your data safe and secure, even in sudden downpours or dust storms.
Military-rated protection
The rugged enclosure is military rated (MIL-STD-810G) to protect your drive against environmental hazards such as drops, shock and vibration.
The tough-wearing exterior casing provides shock resistance, while the flexible silicone sleeve provides extra protection, absorbing the impact of bumps, rough baggage handling or drops. Inside, an extra layer of silicone provides drive stability.
Hardware
Bus Type:USB 3.1 Gen 2
Chipset ID:ASMedia - ASM235CM
Compatible Drive Types:SATA
Drive Installation:Fixed
Drive Size:2.5in
Fan(s):No
Industry Standards:MIL-STD-810G, Method 503.5 (Thermal Shock)
MIL-STD-810G, Method 514.6 (Vibration)
MIL-STD-810G, Method 516.6 (Shock)
MIL-STD-810G, Method 507.5 (Humidity)
MIL-STD-810G, Method 509.5 (Salt Spray)
MIL-STD-810G, Method 510.5, Procedure I (Sand and Dust)
MIL-STD-810G, Method 508.6 (Fungus)
Interface:USB 3.1 Gen 2
Number of 2.5 inch bays:1
Number of Drives:1
Supported Drive Height(s):7mm
9.5mm
Performance
4Kn Support:Yes
Hot Swap Capability:No
Max Drive Capacity:Tested up to 2TB at 7200 RPM
Maximum Data Transfer Rate:10 Gbps
MTBF:48000
S.M.A.R.T. Support:Yes
TRIM Support:Yes
Type and Rate:USB 3.1 Gen 2 - 10 Gbit/s
SATA III (6 Gbps)
UASP Support:Yes
Connector(s)
Drive Connectors:1 - SATA Data and Power Combo (7+15 pin) Receptacle
Host Connectors:1 - USB Type-C (24 pin) USB 3.1 (10Gbps)
Other Interface(s):1 - USB 3.1 USB Type-A (9 pin, Gen 2, 10 Gbps) Female
Software
OS Compatibility:OS independent No software or drivers required
Indicators
LED Indicators:1 - Diagnostic LED (Drive Power and Activity)
Indicators
LED Indicators:1 - Diagnostic LED (Drive Power and Activity)
Environmental
Humidity:20% - 95% RH
Operating Temperature:-40oC to 85oC (-40oF to 185oF)
Storage Temperature:-40oC to 85oC (-40oF to 185oF)
Physical Characteristics
Color:Black
Enclosure Type:Plastic
Item Dimension (L inchxW inchxH inch)
6 x 8 x 3
Whats in the Box
Included in Package:1 - drive enclosure
1 - USB-C to USB-C cable
1 - USB-C to USB-A cable
1 - foam drive pad
1 - hex key
1 - quick-install guide
Weight
1.00lb
Warranty Information
2 Years