SKU 117238 image 1

EnGenius Network EAP150 Wireless 802.11b/g/n High Power Access Point/WDS Bridge 150Mbps Retail

  • SKU: 117238
  • Vendor: EnGenius
  • UPC: 655216005341
EAP150 is a High-power wireless-n Access Point/ WDS Bridge/ WDS AP operates seamlessly in the 2.4GHz frequency spectrum supporting 802.11 b/g/n standard high-speed feature. The smoke detector appearance is designed to blend into various environments, making this model ideal for hotels, schools, or public common areas.

With up to 26dBm wireless transmit power and 150Mpbs data speed rate, EAP150 delivers up to 3x faster speed and 6x extended coverage than 802.11g. Wireless performance is fine-tuned by engineers, so it delivers the best wireless range and speed for clients. EAP150 provides wireless network with superior throughput, performance and unparalleled Wi-Fi coverage.

To protect wireless transmissions, EAP150 encrypts all wireless transmissions through WEP data encryption and supports WPA/WPA2. MAC address filter allows users to setup select or deny stations with access to the network. EAP150 thus is the best product to ensure superior wireless performance.

Hardware Specifications:
MCU/RF: RTL8196C + RTL8188RE
Memory: 32MB
Flash: 4MB
Physical Interface:
LAN: 1 x 10/100 Fast Ethernet RJ-45
Reset Button
Power Jack
LEDs Status
Power/Status
LAN (10/100Mpbs)
WLAN (Wireless connection)
Power Requirement:
Power Supply: 90 to 240 VDC +/- 10%, 50/60 Hz
Active Ethernet (Power over Ethernet, IEEE802.3af)
48 VDC/0.375A
Device: 12V/1A

RF Specifications:
Wireless Standard: IEEE802.11 b/g/n
Frequency: 2.400 2.484GHz (b/g/n)
Modulation Technologies:
OFDM: BPSK, QPSK, 16-QAM, 64-QAM
DBPSK, DQPSK, CCK
Operating Channels: 11 channels

Software Specifications:
Topology: Infrastructure/Ad-Hoc
Operation Mode: Access Point/WDS Bridge/WDS AP
Multiple BSSID: Supports up to 4 BSSIDs
LAN Settings:
IP (check validity and DHCP server IP range)
MAC
DHCP Server: DHCP range, lease time, client list
VLANs: Supports 802.1q (up to 4 VLANs)
SSID to VLAN mapping
Spanning Tree: Supports 802.1d Spanning Tree Protocol
Wireless mode: 11b/11g/11n
Channel selection (setting varies by country)
Channel bandwidth (Auto, 20MHz, 40MHz)
Transmission rate: 11n only, 11b/g/n mix, 11b only, 11b/g, 11g only
VPN: VPN pass-through (PPTP, L2TP, IPSEC)
QoS: WMM
WPS: Software only
Security: WEP Encryption - 64/128 bit
WPA Personal (WPA-PSK using TKIP or AES)
WPA Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
SSID broadcast enable/disable
MAC Address Filter (AP mode)
WLAN L2 isolation (AP mode)
Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics)

Management:
Tx Power Control: Adjust transmit power by dBm
Configuration: Web-based configuration (HTTP)/Telnet
Telnet Server: CLI
Firmware Upgrade: Upgrade firmware via web browser
Administrator Setting: Administrator Username and Password change
Reset Setting
Reboot (press 1 second). Reset to Factory Default (press 10 second)
System Monitoring: Status Statistic and Event log
SNMP: V1 , V2c
MIB: MIB I , MIB II(RFC1213) and Private MIB
Traffic Measurement: Per interface
Auto-channel Selection:
Automatically selecting least congested channel
Bandwidth Measurement:
IP range and bandwidth management
Backup and Restore:
Save and restore settings through Web interface
Diagnosis: IP pinging statistics

Certifications:
FCC, CE, IC

Item Dimension (L"xW"xH"):
9 x 12 x 3

Weight:
1.95 lb

Warranty Information
1 Year