Product Detail

Voltage compatibility - 120V AC , Frequency compatibility - 60 Hz

Output volt amp capacity (VA) - 1500 , Output watt capacity (watts) - 1000 , Output nominal voltage - 120V AC

Output voltage regulation - LINE MODE---Sine wave line voltage 120V (below 18 percent or above 8 percent) , BATTERY MODE---Sine wave output 120V above or below 5 percent

Output frequency regulation - LINE MODE---Passes line frequency of 60Hz above or below 10 percent , BATTERY MODE---Inverter output regulated to 60Hz above or below 0.5Hz

Outlet quantity / type - 8 NEMA 5-15R

Overload protection - 15A input breaker

Maximum input amps---10.1A / 1090 watts , Input connection type---NEMA 5-15P , Input cord length---10 ft., 14 gauge , Recommended electrical service---15A 120V

BATTERY - Full load runtime---10 minutes (1000 watts), add 1 BP36V15-2U for 37 minutes , Half load runtime---25 minutes (500 watts), add 1 BP36V15-2U for 79 minutes

Expandable battery runtime - Supports extended runtime with optional BP36V15-2U external battery pack (limit 1)

DC system voltage - 36 VDC , Typical battery lifespan - 3-6 years, depending on usage , Battery recharge rate - 2-4 hours to 90 percent , Replacement Battery Cartridge - RBC93-2U

Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without using battery power, during brownouts to 75V and overvoltages to 147V

Overvoltage correction - Input voltages between 128 and 147VAC are reduced by 12 percent

Brownout correction - Input voltages between 95 and 104VAC are boosted by 12 percent

Severe brownout correction - Input voltages between 75 and 94VAC are boosted by 24 percent

Front panel LEDs - 5 front panel LEDs - Green POWER LED, Green VOLTAGE CORRECTION LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.

Alarms - 3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and low battery (continuous tone)

Includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions

AC surge suppression - 480 joules

AC suppression response time - Instantaneous

EMI / RFI AC noise suppression - Yes

Shipping weight - 53 lbs, 23 kg , Unit weight - 43.5 lbs , 19.7 kg

Shipping Dimensions (H x W x D) - 9 x 24 x 20.25 inches, 22.9 x 61 x 51.4 cm , Unit Dimensions - 3.5 x 17.5 x 13.5 inches , 8.89 x 44.5 x 34.3 cm

Material of construction - Steel

Form factors supported - Rack/Tower (2U)

Cooling method - Built-in cooling fan

Battery Access - Battery access door allows hot swap battery replacement without powering connected equipment off

Operating Temperature - 32 to 104 degrees Fahrenheit / 0 to 40 degrees Celsius

Storage Temperature - 5 to 122 degrees Fahrenheit / -15 to 50 degrees Celsius

Relative Humidity - 0 to 95 percent , non-condensing

Line mode BTU/hr. (Max.) - 81.9 , Battery mode BTU/hr. (Max.) - 277.9

Includes 2 built-in monitoring ports, 1-USB and 1-DB9.

Includes PowerAlert UPS monitoring software for network and standalone operating systems. Ships with complete USB and DB9 cabling.

Built-in accessory slot accommodates internal SNMPWEBCARD and other network accessories

Compatible with Tripp Lites Watchdog system service to restore operation to locked equipment through soft reboot of application / OS or hard power off/on reboot of connected equipment - ideal for unattended kiosk applications

Transfer time from line power to battery mode - 2-4 milliseconds

Low voltage transfer to battery power - 75V (resets to line power as voltage increases to 79V)

High voltage transfer to battery power - 147V (resets to line power as voltage decreases to 144V)

Certifications - UL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM (Mexico)

EPO port - Includes RJ11 EPO (emergency power off) port and cable

Inverter can be cold started to enable temporary AC output during a power failure , Attractive black housing