Product Detail

Voltage compatibility - 120V AC , Frequency compatibility - 60 Hz

Output volt amp capacity (VA) - 2200 , Output watt capacity (watts) - 1600 , Output nominal voltage - 120V AC

Output voltage regulation - LINE MODE---Sine wave line voltage 120V (below 18 percent or above 8 percent) , BATTERY MODE---Sine wave output 120V above or below 5 percent

Output frequency regulation - LINE MODE---Passes line frequency of 60Hz above or below 10 percent , BATTERY MODE---Inverter output regulated to 60Hz above or below 0.5Hz

Outlet quantity / type - 4 NEMA 5-15R and 4 NEMA 5-15/20R

Overload protection - Resettable circuit breaker

Maximum input amps - 16A / 1733 watts , Input connection type - NEMA 5-20P , Input cord length---10 ft., 12 gauge, black , Recommended electrical service---20A 120V

BATTERY - Full load runtime---8 minutes (2200VA) , Half load runtime---20 minutes (1100VA)

Expandable battery runtime - Supports extended runtime with optional external battery packs BP48V242U (limit 1) and BP48V60RT3U (multi-pack compatible)

DC system voltage - 48V DC , Typical battery lifespan - 3-6 years, depending on usage

Battery recharge rate - 2-4 hours to 90 percent , Replacement Battery Cartridge - RBC94-2U

Voltage regulation description - Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without using battery power, during brownouts to 79V and overvoltages to 147V

Overvoltage correction - Input voltages between 128 and 147V AC are reduced by 12 percent

Direct pass through - Input voltages between 105 and 127V AC are passed on to connected equipment unchanged

Brownout correction - Input voltages between 95 and 104V AC are boosted by 12 percent

Severe brownout correction - Input voltages between 79 and 94V AC are boosted by 24 percent

Front panel LEDs - 5 front panel LEDs Green POWER LED, Green VOLTAGE CORRECTION LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.

Includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions

AC surge suppression - 480 joules

AC suppression response time - Instantaneous

EMI / RFI AC noise suppression - Yes

Shipping weight - 72 lbs , 32.7 kg , Unit weight - 64 lbs , 29.1 kg

Unit Dimensions (H x W x D) - 3.5 x 17.5 x 19 inches , 8.89 x 44.5 x 48.3 cm , Shippoing Dimensions - 9 x 23.5 x 20 inches, 5.1 x 59.7 x 122.7 cm

Material of construction - Steel , Form factors supported - Rack/Tower (2U)

Cooling method - Fan , Battery Access - Battery access door allows hot swap battery replacement without powering connected equipment off

Operating Temperature - 32 to 104 degrees Fahrenheit / 0 to 40 degrees Celsius

Storage Temperature - 5 to 122 degrees Fahrenheit / -15 to 50 degrees Celsius

Relative Humidity - 0 to 95 percent , non-condensing

Line mode BTU/hr. (Max.) - 218.2 BTU/hr.

Software and cabling included - Includes PowerAlert UPS monitoring software for all common network and standalone operating systems. Ships with 4 cables, 2-USB to USB 2-DB9 to DB9

SNMP compatibility - Built-in accessory slot accommodates internal SNMPWEBCARD and other network accessories

Compatible with Tripp Lites WatchDog system service software to restore operation to locked equipment through soft reboot of application / OS or hard power off/on reboot of connected equipment - ideal for unattended kiosk applications

Transfer time from line power to battery mode - 2-4 milliseconds

Low voltage transfer to battery power - 79V (resets to line power as voltage increases to 83V)

High voltage transfer to battery power - 147V (resets to line power as voltage decreases to 144V)

Certifications - UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico)

EPO port - Includes RJ11 EPO (emergency power off) port and interconnection cable

Warranty - 2 years