StarTec Hard Drive 25SATSAS35HD 2.5"to3.5" HD Adapter for SATA and SAS SSDs/HDDs Retail
- SKU: 218362
- Vendor: StarTech
- UPC: 065030874434
Convert a 2.5" drive into a 3.5" drive
The 2.5" to 3.5" hard drive bay adapter lets you install a newer, higher performance drive such as an SSD into a legacy system that may only support a 3.5" hard drive. It provides a cost-efficient way to enhance storage performance and reliability without expensive upgrades to core IT systems. It's also ideal for system administrators who want to build a system that takes advantage of the increased performance of a 2.5" HDD/SSD.
To utilize the full speed potential of your SATA/SAS drive, the adapter supports transfer speeds up to 6Gbps.
Easy and flexible installation
You can install the adapter into a desktop, server, storage-array, hot-swap bay, and drive drawer. It offers permanent installation in a 3.5" drive bay with standard mounting holes. When the adapter is installed, you simply slide a 2.5" HDD/SSD into the adapter enclosure, with no tools required.
The adapter is suitable for drives with a height of up to 15 mm. Virtually any 2.5" SATA/SAS drive can be made to look and function like a 3.5" drive.
Identify and track your drives
The adapter includes a label you can use to track and record information about the installed drive.
The 25SATSAS35HD is backed by a StarTech.com 2-year warranty and free lifetime technical support.
HARDWARE
Compatible Drive Types :SAS and SATA
Drive Installation:Removable
Drive Size :2.5in and 3.5in
Fan(s):No
Front Door Key Lock :No
Interface :
SATA
SAS
Number of 2.5 inch bays:1
Number of Drives:1
Supported Drive Height(s):
7mm
9.5mm
12.5mm
15mm
PERFORMANCE
4Kn Support:Yes
Hot Swap Capability:Yes
S.M.A.R.T. Support :Yes
TRIM Support :Yes
Type and Rate :SATA/SAS 6 Gbps
CONNECTOR(S)
Drive Connectors:1 - SFF-8482 (29 pin, Data Power, Internal SAS) Receptacle
Host Connectors:1 - 22 pin SATA / SAS Data + Power (7 + 15 pin) Receptacle
SPECIAL NOTES / REQUIREMENTS
Note :Although mobile racks can enable a Serial Attached SCSI (SAS) drive to connect using a standard Serial ATA (SATA) connector, the drive controller must be SAS compatible to properly support SAS drives. SAS controllers can work with SAS and SATA drives, but most SAS drives will only work with a SAS controller.
ENVIRONMENTAL
Humidity :5% to 65%
Operating Temperature :0oC to 55oC (32oF to 131oF)
Storage Temperature :-20oC to 55oC (-4oF to 131oF)
PHYSICAL CHARACTERISTICS
Color :Silver and Black
Enclosure Type :Aluminum and Plastic
WHATS IN THE BOX
Included in Package :
1 - hard drive adapter
1 - set of mounting hardware
1 - quick-start guide
Item Dimension (L"xW"xH")
7 x 5 x 2
Weight
1.00 lb
Warranty Information
2 Year Warranty